The hottest leap forward development to revitalize

  • Detail

Developing and revitalizing the plastic industry by leaps and bounds

China has become one of the largest countries in the world in the plastic industry. The development of China's plastic industry chain has been integrated with the global plastic industry. At the same time, driven by China's booming huge consumer market, the trend of foreign trade import and export in the main links of China's plastic industry chain has become the focus of the industry

products: the added value of export products needs to be improved

according to the statistics of the General Administration of customs, the total import and export trade of China's plastic products in 2008 was 38.84 billion US dollars, an increase of 12.6% year-on-year., The year-on-year growth rate dropped by 2.6 percentage points, with a trade surplus of US $14.98 billion. Among them, the cumulative export volume was US $26.91 billion, a year-on-year increase of 15.5%., It accounts for 8.7% of the total exports of light industry., It ranks sixth in the light industry. The effect of the export incentive policy began to show. It was learned from Guangzhou Customs that on november1,2008, the state raised the export tax rebate rate of most tax lines of plastic products to 9%. After that, it has played a certain role in promoting the export of plastic products. In November and December last year, Guangdong's single month exports of plastic products reached record highs, reaching US $650million and US $810million respectively, a substantial increase of 30%. And 53.49%

from the overall situation of the industry: in December 2008, the export of plastic products showed signs of stabilizing and rebounded slightly. The data showed that the growth rate of monthly export volume fell by 2.9% year-on-year to a slight increase of 0.66% month. According to the introduction of manufacturers, the increase of export tax rebate rate of some plastic products began to play a positive role in the export of plastic products

in recent years, China's plastic export products have gradually expanded from processing with supplied materials to general consumer goods, but the added value is still low. In 2007, the average unit price of plastic products exported was US $2250/ton, the average unit price of imports was US $6491/ton, and the unit price of imports was 2.88 times that of exports. On the other hand, it also shows that China has a huge domestic demand for high-tech products, which need to be imported

in terms of product segments, plastic pipes have obvious application advantages and promising market development prospects. At present, the processing capacity of the whole industry has exceeded 5million tons. In 2008, China's output of plastic pipes and fittings was 4.5934 million tons, a year-on-year increase of 28.189%. The export of plastic pipes reached 35 If the consistency error between the eccentric distance of the connector under the lever and the length of the short arm of the lever is controlled within 12%, 630000 tons, with a year-on-year increase of 22.21%., The export volume was USD 1.002 billion, a year-on-year increase of 31.15%; The import volume was 40800 tons, a year-on-year decrease of 10.38%, and the import volume was US $470million, a year-on-year increase of 4.94%

plastic machinery: rapid growth but still high trade deficit

according to the import and export statistics of the National Bureau of statistics and China Customs, in 2008, China's plastic machinery industry achieved a total industrial output of 26.006 billion yuan, an increase of 14.08% over the previous year., More than five percentage points higher than China's GDP; The total annual sales output value was 24.605 billion yuan, an increase of 11.529% over the previous year; The sales revenue was 23.842 billion yuan, a year-on-year increase of 9.139%; The export delivery value was US $1.06 billion, a year-on-year increase of 3.139% and the total profit was RMB 1.583 billion, a year-on-year decrease of 15.869%. On the whole, except for the obvious decline in profit indicators, other economic indicators still exceeded the level of the previous year, maintaining a steady and rapid growth trend, and achieving rapid growth for eight consecutive years since the new century

despite the impact of the international financial crisis and the impact of India's anti-dumping on Zhongrun injection molding machines, the export of China's plastic machinery in 2008 still performed well and maintained the momentum of rapid growth. The annual export delivery value was US $1.06 billion, the largest since the new century. The export destinations are Japan, Taiwan, China province of China, Germany, South Korea, the United States, Canada, India, Austria, Hong Kong, Luxembourg, Indonesia, the Netherlands, Vietnam, Thailand, the Russian Federation and other more than 120 countries and regions

in 2008, the amount of plastic machinery imported by China was about US $2.014 billion, a decrease of US $811million over the previous year. It was also the first year in many years that China changed the import of plastic machinery to continue to rise. The sources of import goods are Taiwan Province, Japan, Germany, Hanrun, the United States, Canada, the Netherlands, Austria, Italy, France and other countries and regions

luobaihui, a specially invited researcher in the industry of China International Economic Development Research Center, pointed out that although China has become a major exporter of plastic machinery, and the export volume and amount have shown a significant growth trend year after year, China still needs to import a large number of Chinese and foreign products from abroad? The import of high-grade plastic machinery, especially the situation that the import volume is greater than the export volume, is very prominent. Only last year, the import volume was almost twice as much as the export volume, which is not commensurate with Zhongrun's status as the world's largest annual output of plastic machinery and a major exporter. The industry must speed up to change the passive situation

consumption increasing domestic demand strengthening

the consumption of plastic additives in China in 2008 was 2.73 million tons. According to the investigation and analysis of the additives special committee of China Plastics Association, the production and marketing of antioxidants and light stabilizers will continue to decrease due to the reduction of domestic and foreign consumption demand and consumption

2009 compared with 2008, the production and sales volume of enterprises that directly export antioxidants and light stabilizers and those that sell antioxidants and light stabilizers to export plastic products are expected to decrease by 20%-40%; The production and sales of antioxidant and light stabilizer enterprises mainly for domestic general consumption are expected to decrease by 10%-30%. It is estimated that by the first half of 2011, the average monthly production and sales volume of domestic antioxidant and light stabilizer enterprises can recover to the level of the first half of 2008. In the second half of 2011, the average monthly production and sales volume of domestic antioxidant and light stabilizer enterprises began to increase by about 10%

luobaihui, a specially invited industry researcher of China International Economic Development Research Center, pointed out that China's plastic industry has ranked among the world's leading countries in plastics, and its overall advantages are gradually improving. Its sacred mission is to make the plastic processing machinery rank first in the world, and develop from a large country of design and manufacturing to an advanced country of independent development; So that the production of plastic synthetic resin and the processing of plastic products can not rank the second in the world if the size and weight of the output are too low, and gradually change from relying heavily on imported resin to relying on domestic multi variety production to meet the market demand; From processing tens of millions of tons of products to the industry of Chinese brands with more independent intellectual property rights, so that the whole plastic industry can achieve leapfrog development and revitalize the plastic industry with practical actions

Copyright © 2011 JIN SHI